Honda Civic TYPE R Road Specification Kit
In this clip we are shown peice by peice the contents of the conversion kit.
Windows Media 
Quicktime
In this clip we are given an in depth view of the subframe from the Honda Civic Engined Mini Conversion Kit.
Windows Media Quicktime
Contents Include:
- Tubular front subframe
- Inboard front shockers and springs in aluminium and adjustable for ride height/damping
- Bottom wishbones in CDS steel with rose joints
- Top wishbones in aluminium with left and right hand rose joints adjustable for caster and camber on the car
- Set of rose jointed push rods and levers
- Aluminium throttle pedal adaptor and bearing
- Battery brackets
- Aluminium fuel tank
- Aluminium and plastic radiator
- Gear lever and two gear cables
- Full tubular roll cage
- Engine mounting brackets to accept original Honda VTech rubber engine mountings
- Standard manifold with stainless steel exhaust system and silencer
- Rear suspension arms in CDS steel with rose joints adjustable for camber and toe
- Two race spec drive shafts (original VTech joints required)
- Rear aluminium shock absorbers and springs adjustable for ride, height and damping
- Rear brake discs, pads, calipers and handbrake cable
- Powder coated in satin black as standard or pearlescent colours add £100
The price list for this kit can be downloaded here 
Adobe PDF
Microsoft Word
Optional Extras & Performance Modifications
HYDRA ENGINE MANAGEMENT this is a plug in aftermarket Engine Management system and wiring loom, developed by Zcars for their VTech kits. It comes complete with its own wiring loom which only then requires a 12 volt feed and earth to make it run. With the standard kit exhaust and silencer, the results are a 10% increase in top end bhp to 220 but the real gains are to be found in the mid range torque. This is achieved by careful mapping of the VTech system and operating it earlier in the rev range, something that other systems struggle to cope with.
Four into to into one stainless steel performance exhaust manifold gives another 15 bhp if use in conjunction with above HYDRA system.
46mm individual throttle bodies and inlet manifold increase power by a further 20bhp to give a total of 255 bhp
Supercharger kits are available to suit your needs with upto 400BHP and 275lb ft of torque